• Dealer Map
    1. Deere
    2. New Equipment
    3. Agriculture
    4. Precision Farming Equipment
    5. Monitors Receivers And Guidance

    Monitors Receivers and Guidance

    MOBILE RTK

    • Provides +/- 1 inch pass-to-pass accuracy season after season, and year after year
    • Allows you to use RTK precision in difficult areas such as hilly terrain because there is no line-of-sight requirement to the base station.
    • No need to manually switch base stations as you move between fields you can roam anywhere within the network and have access to the RTK correction signal.
    • Requires a StarFire 6000 receiver, SF3 Ready Activation, RTK Ready Activation
    • Requires John Deere Mobile RTK subscription

    RTK RADIO 450

    • Provides +/- 1 inch pass-to-pass accuracy season after season, and year after year
    • Use a Dealer-owned RTK network to reduce your administrative expenses
    • Provides less chance of radio interference, and RTK Extend to minimize shading signal loss
    • Requires a StarFire 6000 receiver, SF3 Ready Activation, and RTK Ready Activation
    • Requires RTK subscription provided by your John Deere dealer or your own base station

    RTK RADIO 900

    • Provides +/- 1 inch pass-to-pass accuracy season after season, and year after year
    • Use a Dealer-owned RTK network to reduce your administrative expenses
    • Provides less chance of radio interference, and RTK Extend to minimize shading signal loss
    • Requires a StarFire 6000 receiver, SF3 Ready Activation, and RTK Ready Activation
    • Requires RTK subscription provided by your John Deere dealer or your own base station

    STARFIRE 7500 RECEIVER

    • RTK-like accuracy 2.5 cm pass to pass accuracy
    • SF-RTK achieves 73% faster pull-in times1, compared to SF3 signal
    • Long-term repeatability, season to season
    • Drop-in replacement for StarFire 6000 Receiver

    ITEC PRO

    • Increased machine automation allows operator to focus their attention on the quality of the job.
    • Improves productivity through consistent, repeated optimized end turns across a field.

    G5 PLUS UNIVERSAL DISPLAY

    • Our largest display ever 12.8-inch touchscreen with 1080p HD resolution
    • 3x faster processor than previous models, for quicker cold boot times
    • Permanent AutoTrac and Section Control license comes standard
    • AutoTrac RowSense permanent license available
    • Also available with optional 1- or 3-year G5 Advanced license to add even more precision and automation capabilities

    4200 SECTION CONTROL ACTIVATION

    • Reduce overlap and minimize skips ensuring precise placement of crop protectants and nutrients
    • Reduce product overlap by approximately 4.3 percent
    • Improve performance with tuning, plant-to-row, and boundary features
    • Reduce operator fatigue so they can stay in the field longer

    *Based on independent university study of results with and without Section Control.Results will vary based on conditions, planter size and type.

    4200 COMMAND CENTER DISPLAY

    • Available factory-installed on 6R, 7-210R and 7-230R Tractors
    • Comes with documentation in base price
    • Easily add and change features as your needs change
    • Permanent, non-transferable AutoTrac activation optional

    4240 AUTOTRAC ACTIVATION

    • Accurate placement of inputs
    • Increases productivity by increased AutoTrac usage in subsequent cropping passes
    • Decrease crop damage in subsequent cropping practices
    • Higher accuracy of placement of inputs improving crop potential

    4240 UNIVERSAL DISPLAY

    • An affordable and portable way to put precision ag to work for you
    • 8.4-inch touchscreen provides easy-to-use experience
    • High-contrast screen allows you to see your display in bright sunlight, even on open station tractors
    • Basic documentation and AutoTrac come standard

    4640 UNIVERSAL DISPLAY

    • Improved operating experience for older John Deere tractors and mixed fleets
    • Enhanced data merging capabilities deliver more on-board and off-board flexibility
    • Improved data capture and collection capabilities providing more accurate Section Control performance and documentation
    • Precisely apply multiple products simultaneously with individual coverage maps and application points

    ACTIVE FILL CONTROL

    • Automated trailer and truck filling
    • Reduce operator stress and fatigue
    • Improve harvest efficiency
    • Harvest day and night

    ACTIVE IMPLEMENT GUIDANCE

    • Accurate placement of inputs
    • Increases productivity by increased AutoTrac usage in subsequent cropping passes.
    • Decrease crop damage in subsequent cropping practices
    • Higher accuracy of placement of inputs improving crop potential.

    AUTOPATH

    • Use data from the first pass, either strip-till or planting, to automatically create full-field guidance lines for secondary passes such as planting, spraying, and harvest
    • Setup time for secondary operations is faster and crop damage is reduced as guidance is based on actual planted crop rows
    • Know which rows to start on, regardless of equipment width, even in down crops
    • Available as part of the Automation 4.0 Package and Advanced License.

    AUTO TRAC UNIVERSAL 300

    • Automated setup. Simply press the calibrate button, drive a few hundred feet and the software calculates the right settings for your equipment
    • Smaller and quieter with a more comfortable steering wheel
    • Dust and moisture resistant for use with an open station tractor

    AUTO TRAC CONTROLLER 300 STEERING KIT

    • Focus more on job quality and less on steering
    • Keep original operator station ergonomics with a truly integrated experience
    • Reduce skips and overlaps even on machines without factory installed AutoTrac
    • Available on a wide variety of tractors, from utility tractors to articulated 4-wheel drives
    • Choose the level of accuracy that fits your needs SF1, SF3, or RTK

    AUTO TRAC CONTROLLER

    Realize the benefits of AutoTrac on Non-Deere machines.

    • Make long days easier with equipment and technology that works together for you.
    • Increase productivity by being able to cover more ground.
    • Reduce overlap and maximize inputs.
    • Reduce fatigue and improve operator experience

    AUTO TRAC VISION

    • Decrease crop damage, reduce operator fatigue, and operate at higher speeds compared to manual driving by enabling the equipment to follow the actual planted crop row.

    GEN 4 COMMANDCENTER AUTOMATION ACTIVATION

    • Use data from planting or strip till and planting to automatically create full-field guidance lines for secondary passes
    • Let AutoTrac Turn Automation take over your turns, implement functions, and speed
    • Crush harvest chaos through combine and grain cart controls with Machine Sync
    • AutoTrac Implement Guidance places your tool exactly where it needs to be, even on sidehills and around curves

    G5 COMMANDCENTER

    • Optional factory-installed on select 2024 and later models with CommandCenter controls
    • 3x faster processor than previous models, for quicker cold boot times
    • Large, 10.1-inch touchscreen with 1080p HD resolution 35% larger than previous models
    • Base includes Data Sync, Documentation, Over-the-Air Updates, and Remote Display Access

    G5 UNIVERSAL DISPLAY

    • Large, 10.1-inch touchscreen 35% larger than previous models
    • 3x faster processor than previous models, for quicker cold boot times
    • Brighter, clearer 1080p HD resolution
    • Permanent AutoTrac, Section Control, and AutoTrac, RowSense license available

    G5 ADVANCED PACKAGE

    • Add even more precision and automation to your G5 Display
    • Bundles advanced precision ag tools into one easily renewable license
    • Set up for easy adoption of future autonomous technologies
    • Improve ease and accuracy of every pass by choosing the package tailored to your machine
    • Choose from either 1- or 3-year license options

    G5 PLUS EXTENDED MONITOR

    • Additional screen space to give you an even bigger view of important machine and field information
    • Large, 12.8-inch touchscreen monitor with 1080p HD resolution
    • Reduces the need to swipe between multiple run pages, making it faster and easier to adjust and monitor machines and implements

    G5 PLUS COMMANDCENTER

    • Optional factory-installed on select 2024 and later models with CommandCenter controls
    • Our largest display ever 12.8-inch touchscreen with 1080p HD resolution
    • 3x faster processor than previous models, for quicker cold boot times
    • Base includes AutoTracTM, Section Control, Data Sync, Documentation, Over-the-Air Updates and Remote Display Access

    GEN 4 EXTENDED MONITOR

    • Monitor quality of the work being done in broad acre, high speed operations by seeing a second full page run screen on a second interactive touch screen monitor.
    • Easily make machine or implement setting adjustments by reducing the need to swipe between multiple run pages. 

    Equipment Search